VEVOR GB-GO12A-R Bedienungsanleitung Seite 15

CLEANING AND CARE
CAUTION:All cleaning and maintenance should be carried out when the
barbecue is cool and with the fuel supply turned OFF at the gas cylinder.
CLEANING
"Burning off" the barbecue after every use (for approx 15 minutes) will
keep excessive food residue to a minimum.
OUTSIDE SURFACE
Use mild detergent or baking soda and hot water solution. Non-abrasive
scouring powder can be used on stubborn stains, then rinse with water.
If the paint is flaking off the inside surface of the barbecue lid, it means
that the grease build-up from baking has turned to carbon and is flaking off.
Clean thoroughly with a strong solution of hot soapy water. Rinse with
water and allow to dry completely. NEVER USE OVEN CLEANER.
INTERIOR OF BARBECUE BOTTOM
Remove residue using brush, scraper and/or cleaning pad then wash with
a soapy water solution. Rinse with water and allow to dry.
COOKING GRID
Use a mild soapy water solution. Non-abrasive scouring power can be
used on stubborn stains then rinse with water.
CLEANING THE BURNER ASSEMBLY
CAUTION:All cleaning and maintenance should be carried out when the
barbecue is cool and with the fuel supply turned OFF at the gas cylinder.
Turn the gas OFF at the control knob and disconnect the cylinder.
Remove cooling grate.
Clean the burner with a soft brush or blow clean with compressed air and
wipe with a cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an
opened paper clip).
Inspect burner for any damage (cracks or holes). If damage is found,
replace with a new burner. Reinstall the burner, check to ensure that the
Gas valve orifices are correctly positioned and secured inside the burner
- 13 -