Seat Height Adjustment; Seat Angle Adjustment - Next Level Racing Elite Sim Es2 Benutzerinstruktion

NLR UNIVERSAL SEAT BRACKET ASSEMBLY
(BRACKETS NOT INCLUDED)
A)
A) Remove the adhesive backing on the 4 x Adhesive Washers and apply over the inserts on the seat.
04
B) Align the holes and slots on the Seat Brackets with the insert on the Seat and secure using 4 x M8
16mm Ultra Low Profile Bolts and M8 Washers. Repeat on the other side.

SEAT HEIGHT ADJUSTMENT

Repeat
on Other
Side
A)
70mm
A) For Minimum Seat Height reposition the 4 x Bolts and Washers in the 4th Slot and Hole from the
05 top of the Seat Bracket and secure seat. Repeat on other side.
B) For Maximum Seat Height reposition the 4 x Bolts and Washers in the 2nd Slot and Hole from the
top of the Seat Bracket and secure seat. Repeat on other side.

SEAT ANGLE ADJUSTMENT

Repeat
on Other
Side
22.5°
For Maximum Seat Angle insert 4 x Bolts and Washers in the lowest Slot and highest Hole from the
06
top of the Seat Bracket and secure seat. Repeat on other side.
For other angle adjustments utilise varying slots and hole combinations available.
B)
Repeat
on Other
Side
B)
105mm
Repeat
on Other
Side
TIP: Lay seat on its side
and hold in place.
7
PARTS:
• • 4 x Adhesive Washers
• • 4 x M8 16mm Ultra Low
Profile Socket Head Bolts
• • 4 x M8 Washers
PARTS:
• • NIL
PARTS:
• • NIL