Next Level Racing ELITE SIM ES2 Benutzerinstruktion Seite 6

INSTRUCTIONS
NLR ES2 ELITE SIM RACING SEAT ASSEMBLY
A)
01
A) Remove the cushion from the seat backrest.
B) Adjust the fabric slightly so there is a gap between the Seat Shell and the foam layer.
A)
TIP: Place a heavy
object on the Seat
Base to stop from
tilting backwards.
TIP: Install centered
M8 bolts first on
the back of the
seat, then install M8
side bolts for easy
assembly.
02 A) Align the Seat Backrest with the Seat Base.
B) Bolt through and secure with the 6 x M8 20mm Ultra Low Profile Socket Head Bolts.
A)
03
A) Tuck the fabric into the Seat Base using the Velcro strips.
B) Reinstall the cushion onto the Seat Backrest that was uninstalled in step 1.
B)
B)
B)
Repeat
on Other
Side
6
PARTS:
• • 1 x Seat Backrest
Repeat
on Other
Side
PARTS:
• • 1 x Seat Backrest
• • 1 x Seat Base
• • 6 x M8 20mm Ultra Low
Profile Socket Head Bolts
PARTS:
• • NIL