ENGLISH
Cabinet structure
Important! The structure has to be mounted
according the Assembly Instructions booklet.
Care and cleaning
Cleaning cabinet structure
1. Panels in particleboard, melamine foil:
Wipe clean with a cloth damped in water
or a non-abrasive detergent. Wipe dry
with a clean cloth.
2. Structure in Powder coated carbon steel:
Wipe clean with a cloth damped in water
or a non-abrasive detergent. Wipe dry
with a clean cloth.
Environment concerns
The symbol
on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
3. Splashback in stainless steel:
Always wipe and rub the surface along
the steel grain when cleaning.
Important!
Do not use scouring-powder, steel wool, hard
or sharp tools which can scratch the stainless
steel surface.
Packaging materials
The materials with the symbol
clable. Dispose the packaging in a suitable
collection containers to recycle it.
Before disposal of appliance
Warning! Do these steps to dispose the
appliance:
• Pull the mains plug out of the mains socket.
• Cut off the mains cable and discard it.
• Discard the door catch. This prevents the
children to close themselves inside the ap-
pliance. Risk of suffocation.
16
are recy-