IKEA UDDEN CG3 Bedienungsanleitung Seite 12

ENGLISH
3
Close the oven door
to the first opening
position (approx.
45°). Then pull for-
ward and remove it
from its seat.
5
Release the locking
system to remove
the internal panel of
glass.
7
90°
Turn 2 fasteners by
90° and remove
them from their
seats.
Clean the glass panel with water and soap.
Dry it carefully.
4
Place the door on a
stable surface pro-
tected by a soft
cloth.
6
8
2
1
Carefully lift and re-
move the panel of
glass.
Inserting the door and the glass panel
When the cleaning procedure is completed,
insert the glass panel and the oven door. To
do so, follow the steps in reverse.
The inner glass panel must be assembled
keeping the decorative frame (screen-print-
ing) turned towards outside of the oven. To
double check you did the above operation in
a proper way simply pass your fingers on the
inner glass surface. If the panel of glass is as-
sembled correctly you should not feel any
roughness.
Insert the internal panel of glass into the right
seats as shown below.
Changing the oven lamp and cleaning the
glass cover
Warning! Before you change the oven
lamp (refer to "Product description"),
switch off the appliance and disconnect it
from the electrical supply.
1. Turn the glass cover anti - clockwise and
remove it. Clean the glass cover.
12