Before You Begin - Dell PowerVault 220S Handbuch

Before You Begin

Before you begin removing your system from the rack and converting it to a tower system,
carefully read "Safety Instructions."
Removing the Rack Doors
See the procedures for removing doors in the documentation provided with your rack
cabinet.
Recommended Tools and Supplies
The following tools are required to perform the conversion:
• A #2 Phillips screwdriver
• A 3/16-inch hex-head (Allen) wrench
• A Torx T-10 driver (for removing and installing the front panels)
Conversion Tasks
Removing a system from the rack and removing the RapidRails™ or VersaRails™ rack
mounting hardware from the rack cabinet includes the following tasks:
• Removing the rack doors
• Removing the system from the rack
• Removing the front panel
• Installing the tower front panel
• Installing the base, covers, and bezel
• Removing the RapidRails or VersaRails mounting rail assemblies
• Replacing the rack doors
1-4 Ra c k -t o -To w er C on v e r si on Guide