Dell PowerVault 220S Handbuch Seite 9

Installing the Tower Front Panel
Position the tower front panel in place on the system chassis, using care to install the
1
five light pipes in their holes in the front panel.
NOTE: In the next step, start all 14 T-10 Torx screws in their holes before tightening any of the
screws to ensure proper alignment.
Install the tower front panel on the chassis, securing it with the 14 T-10 Torx screws
2
that you removed in step 2 of the last procedure, "Removing the Front Panel."
F i g u r e 1 - 3 . I n s t a l l i n g t h e To w e r F r o n t P a n e l
screws (14)
light pipes (5)
Ra c k -to -To we r C o nv e r si on Gu i d e
1-7