Activating The Aquaclean Filter - Saeco PicoBaristo HD8927 Bedienungsanleitung

AQUACLEAN
FILTER
0 / 8
ACTIVATE
AQUACLEAN FILTER?
2 MIN
INSERT FILTER
FILL WATER TANK
3 Insert the AquaClean filter vertically onto the filter connection. Push the
AquaClean filter to the lowest possible point. Make sure that the filter fits
tightly and the seal is in the right position, to guarantee the best
performance.

Activating the AquaClean filter

You can install the AquaClean filter at first installation as part of the installation
procedure. If you skipped installation of the AquaClean filter at first use, you can
install it by entering the menu as described below.
1 Press the MENU/SPECIAL DRINKS button, select MENU and press the OK
button to confirm. Scroll to select 'AquaClean' filter. Press the OK button to
confirm.
- The display shows the number of AquaClean filters that have been
installed previously from 0 to 8 filters.
2 The display asks if you want to activate the filter. Press the OK button to
activate the filter.
3 The display asks you to insert the filter and fill the water tank. Prepare the
AquaClean filter and install it in the water tank (see 'Preparing and installing
the AquaClean filter'). Fill the water tank up to the MAX level indication.
English
13