Disassembling The Milk Carafe; Reassembling The Milk Carafe - Saeco PicoBaristo HD8927 Bedienungsanleitung

English
28
1 2
3
4
5
2
1
1
1
2
1 Suction tube
2 Rubber support
3 Milk frother
4 Milk frother connection
5 Dispensing spout lid

Disassembling the milk carafe

1 Press the release buttons on both sides of the top of the milk carafe (1) and
lift the top off the milk carafe (2).
2 Turn the dispensing spout lid upside down and hold it firmly in your hand.
Pull the suction tube off the rubber support.
3 Press the release buttons on the milk froth dispensing spout and remove the
milk frother from the the rubber support.
4 Pull the milk frother connection out of the milk frother.
5 Rinse all components under a lukewarm tap.
Tip: All detachable parts, except the carafe, can be cleaned in the dishwasher.

Reassembling the milk carafe

1 To reassemble the milk froth dispensing spout, follow steps 2 to 4 of
'Disassembling the milk froth dispensing spout' in reverse order.
2 Place the milk froth dispensing spout back in the top of the milk carafe.
3 Place the top of the milk carafe back on the milk carafe.