Preparing And Installing The Aquaclean Filter; Activating The Aquaclean Filter - Saeco Incanto HD8919 Bedienungsanleitung

Preparing and installing the AquaClean filter

Activating the AquaClean filter

ON
OFF
0 / 8
brewed more than
machine before you activate the filter.
Note: Replace the AquaClean filter when the filter icon starts flashing on the
display. Replace the AquaClean filter at least every
machine has not yet indicated that replacement is required.
Remove the AquaClean filter from its packaging. Shake the filter for about
seconds.
Immerse the AquaClean filter upside down in a jug with cold water and
wait until no more air bubbles come out.
Insert the AquaClean filter vertically onto the filter connection. Push the
AquaClean filter to the lowest possible point. Make sure that the filter fits
tightly and the seal is in the right position, to guarantee the best
performance.
You can install the AquaClean filter at first installation as part of the
installation procedure. If you skipped installation of the AquaClean filter at
first use, you can install it by entering the menu as described below.
Press the MENU button, select MENU and press the OK button to
confirm. Scroll to 'AquaClean' filter. Press the OK button to confirm.
Select ON on the display, press the OK button to confirm.
cups with ml capacity , you need to descale the
English
months, even if the