Saeco PicoBaristo HD8927 Bedienungsanleitung Seite 11

English
10
HEATING UP
RINSING
ACTIVATE
AQUACLEAN FILTER?
2 MIN
INSERT FILTER
FILL WATER TANK
14The machine heats up and the display shows the temperature icon.
15Empty the container and place it under the coffee dispensing spout.
16The machine starts rinsing water through the coffee dispensing spout. The
display shows the rinsing icon and a progress bar.
Note: Do not interrupt the rinsing cycle.
17The display asks: Activate AquaClean filter?
Note: If you want to install the AquaClean filter later, press the ESC button and
continue with the manual rinsing cycle. For installation at a later time, see chapter
'AquaClean filter'.
18If you want to install the AquaClean filter, press the OK button. Activation
will take 2 minutes. The display reminds you: Insert filter, fill water tank.
19Remove the AquaClean filter from its packaging. Shake the filter for about 5
seconds.
20Immerse the AquaClean filter upside down in a jug with cold water and wait
until no more air bubbles come out.
21Remove the water tank from the machine and empty it.