The User Interface; First Installation - Saeco PicoBaristo HD8927 Bedienungsanleitung

1 3
2 4
15 cm
15 cm 15 cm
15 cm 15 cm
15 cm 15 cm
15 cm
28 Water tank
29 Grinder adjustment knob
30 Cord
31 Water hardness tester
32 Grease
33 Cleaning brush
34 Multifunctional tool
(measuring scoop, grinder adjustment key and coffee duct cleaning tool)
35 Brew group
36 Service door
37 Coffee exit duct
38 Coffee residues drawer
39 Drip tray full indicator
40 Coffee grounds container
41 Drip tray cover
42 Drip tray
43 Hot water dispensing spout
44 Opening for hot water dispensing spout

The user interface

Use these buttons to navigate through the menus:
1 ESC button: press this button to return to the main menu.
2 OK button: press this button to select, confirm or stop a function.
3 UP button: press this button to scroll up through the display menu.
4 DOWN button: press this button to scroll down through the display menu.
The buttons are backlighted to guide you. To confirm a beverage selection or
to stop the function, you have to press on the OK button. The ESC button is
backlighted to go back and to pause a function when the pause symbol is
shown on the display.

First installation

This machine has been tested with coffee. Although it has been carefully
cleaned, there may be some coffee residues left. We guarantee, however, that
the machine is absolutely new.
Like with most full-automatic machines, you first need to brew some coffees to
enable the machine to complete its self-adjustment and get the best tasting
coffee.
1 Remove all packaging material from the machine.
2 Place the machine on a table or worktop away from the tap, the sink and
heat sources.
Note: Leave at least 15 cm of free space above, behind and on both sides of the
machine.
English
7