Herunterladen Inhalt Inhalt Diese Seite drucken

Special Drinks; How To Select Special Drinks; Inserting And Removing The Hot Water Spout; Dispensing Hot Water - Saeco PicoBaristo HD8927 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für PicoBaristo HD8927:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1
1
2
HOT WATER
4 After brewing milk-based coffee beverages, the display asks you if you want
to perform a quick clean of the milk carafe spout. You can perform the quick
clean while leaving the milk inside the milk carafe. Remove the cup with the
beverage and place a container under the milk froth dispensing spout. Press
the OK button to confirm that you want to quick clean, or press the ESC
button to perform the quick clean later. It is recommended to perform quick
clean at least once a day, see chapter 'Cleaning the milk carafe'.

Special drinks

In the special drinks menu, you can select ristretto, espresso double, flat white,
baby cappuccino, milk froth and hot water.

How to select special drinks

1 Press the MENU/SPECIAL DRINKS button and select 'Drinks'.
2 Press the OK button to confirm.
3 Scroll the menu and select the desired beverage.

Dispensing hot water

Inserting and removing the hot water dispensing spout
To insert the hot water dispensing spout:
1 Tilt the hot water dispensing spout slightly and insert it into the machine.
2 Press and turn the hot water dispensing spout downwards to lock it in the
machine.
To remove the hot water spout:
1 Press the release buttons on the sides of the hot water dispensing spout to
unlock it.
2 Lift the hot water dispensing spout slightly and pull it out of the machine.
Dispensing hot water
Caution: Steam and hot water may spray out of the hot water dispensing
spout when brewing starts. Wait until the cycle has ended before removing
the hot water dispensing spout.
1 Press the MENU/SPECIAL DRINKS button. Select ' Drinks' and scroll the
menu to select ' Hot water'.
Caution: Only select 'Hot water' in the menu when the hot water dispensing
spout is installed.
2 Press the OK button to confirm. The machine starts dispensing a preset
quantity of hot water.
- To stop dispensing hot water, press the OK button or the hot water
button.
Note: If you don't stop the dispensing, the product stops automatically when it
reaches the default quantity or the memorized quantity.

Adjusting quantity and taste

Saeco Adapting System

Coffee is a natural product and its characteristics may vary according to origin,
blend and roasting. The machine is equipped with a self-adjustment system that
English
21

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis