Sharp RT-116H Bedienungsanleitung Seite 7

APSS (AUTO
Rewind
Playback
EJECT 'REC PLAY
APSS PAUSE CONTROL
If you wish to have the tape stop at the beginning
selection, first push the PAUSE button
playback mode, and then push the FF button
APSS SPACING
In order for the APSS to operate
space of at least 4-second
tape. In order to edit space (non•signal space) on tapes, follow
the instructions below.
e Most standard records are produced
duration between programme
sary to edit programme item space when recording
recor ds.
• The APSS may not function
containing the following
The recorded signal
a.
nature (speech, music with silent passages, etc.).
The recorded signal on the tape contains soft classical
b.
music, solo performance,
The recorded signal on the tape is of low strength.
c.
d. The recorded programme
than a three-second space (during which there occurs no
signal) .
The recorded programme
e.
which are not free of noise or stray signals.
PROGRAM
Fast forward Pla back
> •STOP < REW
while the tape is in
or REW button.
correctly, there must be a
duration between each item
with a space of sufficient
items. Therefore, it is unneces-
from such
NOTES
perfectly at all times with tape
characteristics:
on the tape is of an intermittent
modern jazz. etc.
items are separated
items are separated by spaces
SEARCH
SHARP's APSS speeds forward
programme you wish to hear, and plays it back automatically.
If you push the FF button or REW button while the tape is
playing, the tape will advance to the beginning of the next
programme or rewind to the beginning of that programme.
Playback automatically
next programme is reached or when the space preceding the
programme
PAUSE
of the
Push the PAUSE
cancel the pause.
Slide the RECORD
during the process of recording at a point suitable for editing
on the
a programme item.
When the desired length of time has passed, push the PAUSE
button. The space is now edited onto the cassette tape
recording.
Reset the RECORD level fine control to prepare for record-
ing the next item.
Push the PAUSE button again (to disengage) at a suitable
point for starting the recording of the next programmeitem.
Perform steps I to 4 throughout
edit the recording
cassette tape suitable for APSS playback.
ON APSS OPERATION
• Avoid locating the unit in the vicinity
fields, such as those generated
other electrical
•When the APSS is functioning
item in either forward
slight high-pitched
tion of the unit.
by less
5
SYSTEM)
or backward
resumes when the space before the
is reached.
button a second time
level fine control to the
the recording in order to
with spaces that will
of powerful
by TV
appliances.
(searching for a programme
or reverse), the speakers may emit a
sound. This is not due to any malfunc-
to locate the
when you wish to
"—10" position
produce a recorded
magnetic
sets, dynamos or