In Case Of Failure; Technical Data - Mpm Mod-53 Bedienungsanleitung

EN

IN CASE OF FAILURE

Failure type:
front cover not thoroughly
closed
vacuum cleaner housing
overheating
low suction power

TECHNICAL DATA

Technical parameters are indicated on the product nameplate.
Length of power cord: 4,50 m
Working radius: 6.50 m
NOTE! MPM agd S.A. reserves its right to modify the technical data.
Proper disposal of the product (waste electrical and electronic
equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be
disposed with other type of municipal waste. Used equipment may have a negative impact on the
environment and health of people due to potentially containing hazardous substances, mixtures and
components. Mixing electric waste with other types of waste or disassembling those in an unprofes-
sional manner may cause a release of substances that are hazardous to the environment and health.
Used equipment should be handed-over to a point for collection of electric waste. In order to obtain detailed
information regarding the electric waste collection points, the user should contact the municipal point of elec-
tric waste collection or used equipment processing department.
28
Possible causes:
dust bag not attached or
attached improperly
a slight housing temperature increase is normal, but if the
temperature increases considerably, immediately turn off the
vacuum cleaner and contact the service
strongly contaminated filters
full dust bag
blocked hose or extension pipe remove all items blocking the
Instructions:
attach the dust bag properly
clean or replace the filters
replace the dust bag or empty
the textile bag
hose or pipe