Appliance Overview; Using The Appliance - Mpm Mod-53 Bedienungsanleitung

EN

APPLIANCE OVERVIEW

1. On/off switch
2. Carrying handle
3. Guide
4. Dust bag filling indicator
5. Upper cover
6. Upper cover opening button
7. Suction hose connection opening
8. Carrying handle in vertical position
9. Power cord
10. Air discharge filter grill
11. Air discharge filter
12. Bag frame
STATIC ELECTRICITY
Vacuum cleaning certain surfaces at a low air humidity may cause slight electrification of
the appliance. This is natural, does not damage the appliance and does not constitute its
defect. To minimise this phenomenon, it is recommended to:
- frequently discharge the appliance by touching items in the room with the metal pipe,
- increase air humidity in the room,
- use generally available anti-electrostatic products.
APPLIANCE ASSEMBLY
1. Press both latches on the suction hose mounting ring (17), insert the ring into the opening (7)
and release the latches. To disassemble, press the latches again and remove the ring (17) from
the opening (7).
2. Connect the telescopic tube (16) to the other side of the suction hose. Attach one of the suction
attachments (20) or (21) to the end of the pipe.

USING THE APPLIANCE

1. Before turning on the vacuum cleaner, unwind the power cord (9) to a suitable length and plug
it into the mains socket. The yellow mark on the power cord indicates the optimum length. Do
not pull out the cord beyond the red mark! While unwinding the cord, do not press the cord
winder button (23).
2. Press the switch (1) to turn on the vacuum cleaner.
WARNING! Dust bag filling level indicator light turns red when the suction hose is
clogged or the dust bag is full. You need to clean the dust bag or remove the clogging
from the suction hose.
3. To wind the power cord, press the cord winder button (23) with one hand, while holding the
cord with another hand to prevent a sudden movement that could damage it.
4. To ensure optimum appliance setting upon the completion of work, use the guide (3) in the rear
of the vacuum cleaner. Place the rail in the rear of the floor-carpet attachment with connected
suction hose and telescopic pipe on the guide. The second guide that facilitates vacuum clean-
er storage in the vertical position is under the bottom of the appliance.
26
13. Storage compartment for the mova-
ble brush
14. Dust bag
15. Wheels
16. Metal telescopic wand
17. Suction hose mounting ring
18. Suction hose
19. Suction hose handle
20. Floor and carpet tool
21. Slit attachment with movable brush
22. Motor filter
23. Cord winder button)