DESCRIPTION OF THE APPLIANCE
1.
22.2 V lithium-ion ba琀琀ery with a
control panel and display.
2.
Motor module
3.
Bent aluminium pipe
4.
Mul琀椀-purpose illuminated electric
brush
The MOD-70 vacuum cleaner combines the convenience of a cyclonic and cordless vacuum
cleaner. Cyclone technology allows you to 昀椀lter dust without using a dust bag by means of cen-
trifugal force, which means you only need to empty the dust container over the dustbin. The
lithium-ion rechargeable ba琀琀ery with one of the highest ra琀椀os of stored energy to its weight
makes the appliance lightweight and ensures a long opera琀椀ng 琀椀me a昀琀er charging. The vacuum
cleaner is equipped with a three-stage suc琀椀on power adjustment: AUTO, MAX and ECO.
AUTO - the SMART technology used automa琀椀cally switches the suc琀椀on mode depending on
the amount and type of dirt and type of 昀氀oor, in addi琀椀on, the dust sensor used determines the
suc琀椀on power itself. The opera琀椀ng 琀椀me is approx. 40 min. depending on the amount of soiling.
MAX – intense cleaning of the dirty surface using maximum suc琀椀on power. The opera琀椀ng 琀椀me
is approx. 12 min. depending on the amount of soiling.
ECO – allows for the long-las琀椀ng vacuuming of the surface with minimised soiling. The max-
imum opera琀椀ng 琀椀me is approx. 56 min. depending on the amount of soiling; it will allow the
whole apartment to be cleaned.
BEFORE FIRST USE
1. Charge the vacuum cleaner ba琀琀ery (see chapter: "BATTERY CHARGING").
2. Check the vacuum for any damages that might have occurred during transport. If you have any
doubts contact the seller.
3. Make sure the electrical mains parameters match the data on the charger's name plate.
4. Remove the vacuum from the box; remove all s琀椀ckers, transport protectors, bags and 昀椀llers.
5. Assemble the vacuum cleaner correctly (see chapter: "ASSEMBLY OF THE VACUUM CLEANER").
MOD-70_instrukcja_v02.indd 31
MOD-70_instrukcja_v02.indd 31
5.
Wall moun琀椀ng bracket
6.
Crevice a琀琀achment
7.
Upholstery a琀琀achment
8.
Furniture/Vene琀椀an blind a琀琀achment
9.
Ba琀琀ery charger
EN
31
29.11.2023 10:00:49
29.11.2023 10:00:49