Fuel Supply; Pre-Operation Checks - Ruris Rx300S Bedienungsanleitung

EN
Change the engine oil after the first 5 hours of operation, which is the break-in period, then every 25 hours
of operation or every 6 months.
Use quality fuel from authorized Peco stations.
Fill with the best quality UNLEADED PETROL fuel, using a metal funnel, in open areas and away from
sources of fire or sparks that could cause a fire.
WARNING:
Do not feed on the ground or near plants, as you risk damaging the environment.
CAREFUL!
This fuel is extremely flammable. Do not smoke or bring flame or sparks near fuel.
!IMPORTANT
1. Stop the engine before refueling.
2. Using the wrong oil can lead to fouling of the spark plug, clogging of the exhaust or seizing of the piston
rings.
3. Move at least 3 meters away from the fuel point before starting the engine.
4. Using an improper fuel will cause severe damage to the internal parts of the engine in a short time.
1. Check that all screws are tight and adjust if necessary.
2. Check each handlebar lever for functionality. If the handle positions are incorrect, adjust them to
be in the proper positions.
3. Topping up the oil.
- Fill the engine oil sump with RURIS 4T-MAX lubricating oil.
- Place the machine on a flat surface while refueling.
- To check the oil level use the oil dipstick, the oil must be at maximum level.
- Check for oil leaks.
4. Clean the unit of dust and dirt, especially the air filter.
10

6.2. FUEL SUPPLY

6.3. FUEL HANDLING SAFETY

7. PRE-OPERATION CHECKS