Ruris RX300S Bedienungsanleitung Seite 36

EN
● Remove the starter cord from the guide housing.
●
Remove the end of the nut from the square bolt.
● Move the bottom handle around the rear canopy to adjust the height.
Attach the bottom handle with nuts and washers to the square bolts.
The butterfly nut
clutch
Grasp the clutch lever by the guide system. Release the clutch lever to stop the drive system. Release the
clutch lever when you want to slow down or when approaching an obstacle, turn or stop.
Clutch lever
Speed lever
Height adjustment lever
Speed control
The gear lever is located on the handle on the right side. It is used to regulate the engine speed.
Attention : To stop the engine proceed as follows: the engine acceleration is reduced to the minimum,
after which the stop handle is released. Do not stop with the emergency stop handle when the
engine is at maximum speed, except in case of emergency
13
Counter sunk head screw
Saiba plata
Puck grower
Puck grower
Emergency stop lever
Shock lever