Num'axes PROTECTION PIE1075 Gebrauchsanleitung Seite 18

− Make sure that the camera power switch is in the M1, M2 or M3 position
and not in the OFF position.
− Please format the memory card when the camera stops taking
images/videos (format in FAT32).
8.3. The night vision flash range doesn't meet expectations
− Please check to make sure the batteries are fully charged or have enough
power left.
− To ensure accuracy and quality of the night time images, please mount the
camera in a dark environment without any obvious light sources.
− Certain surroundings (like trees, walls, ground, etc.) within flash range can
get you better night time images. Please do not aim the camera to total open
field where there is nothing within the IR flash range to reflect the flash back.
9. After-sales service
Should your product stop working or develop a fault, first read this guide over,
and then check the batteries and replace/recharge them if necessary. Also check
that you are using the product correctly.
If the problem persists, contact your distributor or check out on
www.numaxes.com.
You can also
export@numaxes.com.
Depending on the extent of the malfunction, you may have to return the product
for service and repair.
For all repairs, please supply the complete product and the proof of purchase
(invoice or sales receipt). If you omit one of these items, the after-sales service
will have to invoice you for any repair costs incurred.
10. Guarantee
NUM'AXES Group guarantees the product against production defects for two
years after purchase.
FGIMPGUI362 – Guide PIE1075 – Mars 2025 – ind. A - 18/72
contact NUM'AXES Group at +33.2.38.69.96.27 or