Num'axes PROTECTION PIE1075 Gebrauchsanleitung Seite 17

Stand-by time
Watertightness
Operating
temperature
Dimensions
Weight
8. Troubleshooting
8.1. The photos do not capture subject of interest
− Try to set your camera up in an area where no heat sources are in the
camera's field of view.
− In some cases, setting the camera near water will make it take images with
no subject in them. Try aiming the camera over ground.
− Avoid setting the camera up on small trees that are prone to being moved
by strong winds. Try to set the camera on stable and immovable objects, i.e.,
large trees.
− Remove any limbs which are right in front of the camera lens.
− At night, the PIR sensor may detect beyond the range of the infrared flash.
− Rising sun or sunset can trigger the PIR sensor. The camera must be
reoriented.
− If a subject moves quickly, it may move out of the camera's field of view
before the photo has been taken. Move the camera further back or redirect
it.
8.2. The camera stops taking images/videos or won't take
images/videos
− Please make sure that the memory card is not full. If the memory card is full,
the camera will stop taking photos/videos.
− Check the batteries to make sure that there is enough power left for the
camera to work.
FGIMPGUI362 – Guide PIE1075 – Mars 2025 – ind. A - 17/72
Approximately 3 months
IP65
Between -30°C and +70°C
110 x 90 x 42 mm
145 g (without batteries) | 237 g (with batteries)