Assembly Of Tabletop On Underframe; Assembly Of Side Panels - Cable Guide Table Without Flaps - Cor Level System Bedienungsanleitung

5.8 Montage der Tischplatte am Untergestell
GB
Now carefully align the assembled tabletop on the frame so that all the fixing holes are positioned
10
over the threaded sockets provided. Attach the underframe using the supplied screws and
tighten them all firmly.
Finally, you can use the levelling glides under each leg to adjust the table to any unevenness on
the floor.
5.9 Assembly of side panels for cable guide table without flaps
6
Position the magnetic side sections of the cable guide from the outside at both ends of the
cable guide.
4 0