Cor Level System Bedienungsanleitung Seite 32

GB
The vertical cable guide has a zip that can be fully opened or closed. There are elasticated loops
at both ends of the sock tube. The larger loop is attached to the table leg on the floor and the
smaller loop is attached to the tabletop. Now insert any cables into the cable guide and pull the
zip fastener completely closed.
Lift any table leg slightly and place the larger loop of the sock tube under the end of the leg. Then
insert the adjustable glide into the loop and hook the smaller loop at the top of the sock tube into
the clip that is attached directly above the table leg.
3 2