Assembly Of Tabletop 300/350 Cm - Cor Level System Bedienungsanleitung

GB
8
Insert all connecting bolts into the holes provided. Then tighten the Maxifix connectors slightly
so that the connecting bolts can no longer fall out of the sockets.

5.5 Assembly of tabletop 300/350 cm

Now place the two tabletop elements on the frame and then push them together evenly. Ensure
that the connecting bolts are inserted into the holes provided. Carefully align the joints and butt
joints so that the tabletop transitions are flush in all directions. Then carefully tighten all Maxifix
connectors one by one. Make sure that the tabletops do not shift slightly against each other.
Caution! In the version with flaps, the two tabletop elements are only connected to the top
panels.
3 7