Pre-Assembly Of Tabletop - Cor Level System Bedienungsanleitung

5.4 Pre-assembly of tabletop

GB
Ensure that you have a sufficiently large, dry and clean mounting surface for mounting the table-
top. Be sure to cover this surface with blankets and now carefully place the 4 tabletop parts 4 + 5
upside down on the assembly area in position.
9
Insert the slats into the grooves provided in the tabletops 5 at the positions marked with
arrows.
7
Insert all Maxifix connectors into the holes provided, with the arrow pointing towards the edge.
3 6