Assembly Of Cable Guide - Cor Level System Bedienungsanleitung

GB
Finally, you can use the levelling glides under each leg to adjust the table to any unevenness of
the floor.

4.6 Assembly of cable guide

12
A horizontal cable guide for assembly under the tabletop and a vertical cable guide (sock tube)
13
are supplied with the table. The horizontal cable guide is used to route cables (e.g. mains,
telephone, power or LAN cables) under the tabletop. It consists of three clips and three corresponding
screws. Place the clips wherever you need them under the tabletop and secure each one with a
screw.
Tip: Position a clip plumb-vertically above one end of a leg to hang the vertical cable guide on it
later.
Following assembly, any cables can simply be clicked into the clips.
3 1