Assembly Of Tabletop 500/600 Cm - Cor Level System Bedienungsanleitung

GB
Now place the top panels on the frame and push them evenly together with the other panels.
Make sure that the connecting bolts are inserted into the holes provided. Carefully align the joints
and butt joints so that the panel transitions are flush in all directions. Then carefully tighten all
Maxifix connectors one by one. Make sure that the tabletops do not shift slightly against each
other.

5.6 Assembly of tabletop 500/600 cm

For the 500/600 cm version, place the two additional tabletop elements on the frame and then
push them together evenly. Ensure that the connecting bolts are inserted into the holes provided.
Carefully align the joints and butt joints so that the tabletop transitions are flush in all directions.
Then carefully tighten all Maxifix connectors one by one. Make sure that the tabletops do not shift
slightly against each other.
3 8