Displays In The Camera Viewfinder - Metz mecablitz 52 AF-1 Canon digital Bedlenungsanleitung

Range display in manual flash mode M
In manual flash mode , the distance that
M
must be maintained from the subject for
4.4 m
correct flash exposure is indicated.
m Adjustment to the photographic situation at
Z
F4.0
35
OOM
m
hand can be achieved by, for example,
INFO 1/1
changing the aperture setting on the lens or
selecting a manual partial light output level
(see 7.3).
Exceeding the display range
Flash ranges of up to 99 m or 99 ft can be
E TTL
shown in the display.
4
-99 m
9,0
This display range can be exceeded in the
case of high ISO values and large aperture
m
Z
F1.0
35
OOM
m
openings.
EV
INFO
An arrow or triangle after the distance value
indicates that the display range has been
exceeded.

6 Displays in the camera viewfinder

Examples for the camera viewfinder display:
Flash symbol flashes:
Command to switch on or use the flash unit
(by some cameras).
Flash symbol is illuminated:
The flash unit is ready for use (by some
cameras). The viewfinder in some cameras
features an incorrect exposure warning
function:
the viewfinderís display for aperture value,
shutter speed (or both) flashes by over or
underexposure.
Incorrect exposure guidelines:
• overexposure: do not use the flash!
• underexposure: switch the flash on or use a
tripod and a longer exposure time.
Reasons for incorrect exposure can lay in the
various exposure and automatic program-
mes.
For information applicable to the displays in
the viewfinder of your camera model, refer to
the camera's operating instructions.
k
157