Metz mecablitz 52 AF-1 Canon digital Bedlenungsanleitung Seite 164

Tip:
If you do not necessarily need the full guide
number and maximum flash range of the
flash unit, you can leave the zoom reflector at
the position for the shortest focal length of
the zoom lens.
This will provide full light coverage of the pic-
ture and eliminate the need to continually
adjust it to the focal length of the lens.
Example:
You use a zoom lens with a focal length range
of 35 mm to 105 mm. In this case, you set
the position of the reflector of the flash unit
to 35 mm.
k
164
Resetting to auto-zoom
• Touch the shutter release to begin a data
transfer between the flash unit and the
camera.
• Press the
for the selection menu to appear.
• Press the
touch display.
EV
• Press the
ZOOM touch display and select "Zoom".
• Press the
touch display.
A.Zoom
• Press the
display and select
24
After around 10 seconds, the operation
display appears, or press the
repeatedly until the operation display
appears.
D
button as often as it takes
PARA
sensor button on the
sensor buttons on the
Zoom
sensor button on the
sensor buttons on the touch
A.Zoom
.
D
button