VEVOR FLO500-RD Anweisungen Seite 9

Problem
The motor runs
normally, but the
water drains
slowly.
The water drains
slowly and the
motor works
intermittently
The pump
doesn't start.
The water
doesn't evacuate.
PART DRAWING
REPAIR GUIDE
Cause
The discharge pipe is
blocked.
Possible that the
check valve is half
closed.
Ventilation system blocked.
There is no power going to
the pump. Thermal overload
cut out.
Clean the discharge pipe .
Inspect the check valve.
Inspect the ventilation system.
Wait for the thermal overload to
disengage (about 20-30 minutes)
- 8 -
Solution