Scheppach 5903822901 Originalbetriebsanleitung Seite 21

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Failure to comply with the operating instructions,
• Repairs carried out by third parties, unauthorised
specialists,
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed.
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise your-
self with your device and to use it for its intended purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must be
read and carefully observed by all operating personnel
before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. A, B)
1. Front handle
2. On/Off switch
3. Rear handle
4. Setting wheel for speed preselection
5. Cover
6. Brush roller, wide
7. Fastening screw
8. Shaft interlock
9. Suction adapter
10. Suction port
11. Protective cover
12. Clamping screw
13. Mounting shaft
14. Spring washer
15. Clamping nut
16. Brush roller, narrow
17. Allen key
18. Clamping spanner
19. Replacement carbon brushes
3. Scope of delivery
• 1x universal renovation grinder
• 2x brush roller, wide
• 1x brush roller, narrow
• 1x Allen key
• 1x clamping spanner
• 2x replacement carbon brushes
• 1x operating manual
4. Proper use
With the appropriate accessories for the respective
application, the machine can be used to process met-
al, plastic and wood surfaces, i.e. grinding, deburring,
smoothing, structuring, matting, satin-finishing and
polishing. The applications range from coarse sanding
to fine sanding and high gloss polishing.
The machine may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
www.scheppach.com GB | 21