Eibenstock EHB 32 / 2.2 R R/L Originalbetriebsanleitung Seite 21

N o i s e E m i s s i o n / V i b r a t i o n
The indication of noise emission is measured according to EN 62841-2-1.
The level of acoustic pressure on the work place could exceed 85 dB (A); in
this case protection measures must be taken.
Wear ear protectors!
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 62841-2-1.
The declared vibration emission level represents the main applications of the
tool. However, if the tool is used for different applications, with different acces-
sories or poorly maintained, the vibration emission may differ. This may sig-
nificantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into ac-
count the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator from the effects of
vibration such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
D u s t p r o t e c t i o n
Dust from material such as paint containing lead, some wood species, miner-
als and metal may be harmful. Contact with or inhalation of the dust may cause
allergic reactions and/or respiratory diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech
dust especially in conjunction with additives for wood conditioning (chromate,
wood preservative). Material containing asbestos must only be treated by spe-
cialists.
Where the use of a dust extraction device is possible it shall be used.

The work place must be well ventilated.

The use of a dust mask of filter class P2 is recommended.

W a r r a n t y
In accordance with our general terms and conditions of delivery, a warranty
period of 12 months applies for material defects in business transactions with
companies (proof by invoice or delivery note).
Excluded are damages that can be attributed to natural wear and tear, over-
use or improper handling.
Damages that can be attributed to material or manufacturing defects will be
remedied free of charge by repair or replacement.
Complaints can only be accepted if the device is sent to the supplier or an
Eibenstock authorised repair shop in an undismantled state.
21