PCE Instruments PCE-COM 20 Bedienungsanleitung Seite 52

Import a series of measurements
When the connection has been established successfully, all measurement values saved to the
"PCE-COM 20" can be imported to the software as a cohesive series of measurements.
After clicking on the corresponding icon on the toolbar ("Load a series of measurements from a file"),
a new dialogue will appear (Fig. 3) where you can choose a name for the series of measurements
you would like to import. You can use up to 80 digits.
Fig. 3: Choosing a name
When you have clicked on the „Apply" button, the software will wait for the data transfer (upload) in
the "PCE-COM 20" to start (Fig. 4).
The import of the series of measurements will then start immediately.
You can discard this process at any time by clicking on the „Cancel" button.
Fig. 4: Wait for data transfer
© PCE Instruments
49