PCE Instruments PCE-COM 20 Bedienungsanleitung Seite 50

First use of the software
The language selected by the user during installation will be offered as the standard language of
the software.
If you wish to use a different language than the one selected during installation, you can select it via
the corresponding icon in the toolbar ("Selection of a language supported by the system").
To enable the "PCE-COM 20" to work with the software, the assigned COM port must be set once.
Note:
The COM port for the software can be determined by means of the settings dialogue (Fig. 2).
To find out what COM port is correct, have a look at the device manager of your Windows operating
system.
Fig. 2: settings dialogue
In addition to the connection data, some other settings can be made here.
You can select your desired date format and the unit for the statistical values.
You can either select "MS/m" (megasiemens per metre) or "%IACS" (International Annealed Copper
Standard).
© PCE Instruments
47