PCE Instruments PCE-COM 20 Bedienungsanleitung Seite 46

9. Data uploading
This function is used to transfer measurement data to your connected computer. The transfer starts
with the most current position and ends with the last one.
When you are in the settings overview and click on "DATA UPLOADING", "READY" (see image 13)
will appear in the display. Now you should take all preparatory measures like, e. g. connecting the
device with your computer. If you then press "OK", the instrument will start uploading. This will be
indicated by the lettering "UPLOADING" (see image 14).
When the upload is finished, "UPLOADED" will appear in the display (see image 15). You can now
get back to the main settings screen by pressing "OK".
Image 13
Image 14
Image 15
© PCE Instruments
43