Parkside PTSS 1200 D2 Bedienungsanleitung Und Originalbetriebsanleitung Seite 5

The following warnings are used in the user manual, on the packaging and on the
Read the instruction manual .
Follow the warnings and safety
notes!
Risk of electric shock!
CE mark indicates conformity
with relevant EU directives
applicable for this product .
Safety information
Instructions for use
PLUNGE SAW
˜ Introduction
We congratulate you on the purchase
of your new product . You have chosen
a high quality product . The instructions
for use are part of the product . They
contain important information concerning
safety, use and disposal . Before using the
product, please familiarise yourself with all
of the safety information and instructions
for use . Only use the product as described
and for the specified applications. If you
pass the product on to anyone else,
please ensure that you also pass on all the
documentation with it .
6 GB/IE/NI
Warnings and symbols used
rating label:
Always switch the product off,
remove the power plug from the
mains power socket and let the
product cool before performing
inspection, maintenance and
cleaning work and when the
product is not in use .
Protection class II (double
insulation)
Alternating current/voltage
n
No load speed
0
˜ Intended use
This product is suitable for sawing
longitudinal and cross cuts in a plunge cut
into firmly supported following materials:
Solid wood
Chip board
Plastics
Lightweight construction materials
Working with metals is not permitted .
This product can be used with the
provided guide rails – exclusively for the
cutting techniques described .
Any other use or modification of the
product are considered improper use
and can result in hazards such as death,
life-threatening injuries and damage . The
manufacturer is not liable for any damages
caused by improper use . The product is