Herunterladen Diese Seite drucken

Wilo CIF Einbau- Und Betriebsanleitung Seite 15

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
3
Transport and temporary storage
3.1
Scope of delivery
CIF module
Installation and operating instructions
2 x threaded cable gland (M16x1.5)
2 x RJ45 plug AWG26...22 (field assembly without special tools) (Ethernet variant only)
3.2
Scope of delivery for Northern America
CIF module
Installation and operating instructions
1 threaded cable gland NPT ¼" (only for Stratos MAXO)
2 X RJ45 plug AWG26...22 (field assembly without special tools) (Ethernet variant only)
3.3
Transport inspection
Check delivery immediately for damage and integrity. Where necessary make a complaint immediately.
CAUTION
Damage due to incorrect handling during transport and storage!
Protect the device from moisture, frost and mechanical damage during transport and tem-
porary storage.
4
Intended use
The CIF modules are designed for external control and signalling of the operating status of Wilo pumps.
The CIF modules are not designed for safe deactivation of the pump.
DANGER
Risk of fatal electrical shock!
If used improperly, there is danger of death due to electric shock!
• Never use the control inputs for safety functions.
• Never install the module in non-compatible devices.
4.1
Compatibility of the firmware
To ensure that the functions of the CIF module are available, the following firmware versions (or higher) of
the product in which the module is installed are required:
Pump
Wilo-Stratos MAXO
Wilo-Stratos MAXO
Wilo-Stratos MAXO
Wilo-Stratos MAXO
Installation and operating instructions • Wilo-CIF-Module • Ed.03/2025-05
Version
Comments
01002500
CIF module Version 1.00 RTU, BACnet MS/TP, LON, PLR
01032101
CIF module, Version 3.00
1040000
CIF module, Version 3.02
01042500
CIF modules, Modbus RTU, Version 5.01/ CIF modules Ethernet
multi-protocol (Modbus TCP), Version 5.01
en
15

Werbung

loading