Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1
General information
1.1
About these instructions
These installation and operating instructions are an integral part of the device. Read these instructions be-
fore commencing any work and keep them in an accessible place at all times. Strict adherence to these in-
structions is a requirement for the intended use and correct operation of the product.
All specifications and markings on the device must be observed. These installation and operating instructions
correspond to the relevant version of the device and the underlying safety standards valid at the time of go-
ing to print.
The language of the original operating instructions is German. All other languages of these instructions are
translations of the original operating instructions.
2
Safety
These operating instructions contain basic information which must be adhered to during installation and op-
eration. For this reason, these installation and operating instructions must, without fail, be read by the ser-
vice technician and the responsible qualified personnel/operator before installation and commissioning.
Not only must the general safety instructions listed under this main "Safety" section be adhered to, but also
the special safety instructions that are marked by danger symbols and included under the following main
sections.
2.1
Identification of safety instructions
These installation and operating instructions set out safety instructions for preventing personal injury and
damage to property, which are displayed in different ways:
•
Safety instructions relating to personal injury start with a signal word and are preceded by a correspond-
ing symbol.
•
Safety instructions relating to property damage start with a signal word and are displayed without a sym-
bol.
Signal words
•
DANGER!
Failure to follow the instructions will result in serious injury or death!
•
Warning!
Failure to follow instructions can lead to (serious) injury!
•
Caution!
Failure to follow instructions can lead to property damage and possible total loss.
•
Notice!
Useful information on handling the product
Symbols
These instructions use the following symbols:
General danger symbol
Danger of electric voltage
Warning – hot surfaces
Notes
Installation and operating instructions • Wilo-CIF-Module • Ed.03/2025-05
en
13
Werbung
