Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en
2.2
Personnel qualifications
Personnel must:
•
Be instructed about locally applicable regulations governing accident prevention.
•
Have read and understood the installation and operating instructions.
Personnel must have the following qualifications.
•
Electrical work: a qualified electrician must carry out the electrical work.
•
Installation/dismantling: The technician must be trained in the use of the necessary tools and fixation
materials.
Definition of "qualified electrician"
A qualified electrician is a person with appropriate technical education, knowledge and experience who can
identify and prevent electrical hazards.
2.3
Danger in the event of non‑observance of the safety instructions
Non-observance of the safety instructions can result in risk of injury to persons and damage to product/unit.
Non-observance of the safety instructions will render any claims for damages null and void. In particular,
non-observance can, for example, result in the following risks:
•
Danger to persons due to electrical, mechanical and bacteriological factors
•
Damage to the environment due to leakage of hazardous materials
•
Damage to property
•
Failure of important product/unit functions
•
Failure of required maintenance and repair procedures
2.4
Safety instructions for the operator
Adhere to existing accident prevention regulations! Avoid dangers caused by electrical currents! Local direct-
ives and general directives [e.g. IEC, VDE, etc.] and instructions from local energy supply companies must be
adhered to!
2.5
Safety instructions for inspection and installation work
The operator must ensure that all inspection and installation work is carried out by authorised and qualified
personnel who are also sufficiently informed from their own detailed study of the installation and operating
instructions.
Work on the product/unit may only be carried out when the system is at a standstill. The procedure described
in the installation and operating instructions for shutting down the product/unit must be strictly observed.
Immediately after completing work, all safety and protective devices must be put back in position and/or re-
commissioned.
2.6
Unauthorised modification and manufacture of spare parts
Unauthorised modification and manufacture of spare parts will impair the safety of the product/personnel
and void the manufacturer's declarations regarding safety.
•
Only carry out modifications to the product following consultation with the manufacturer.
•
Only use original spare parts and accessories authorised by the manufacturer.
The use of other parts will absolve the manufacturer of liability for any consequences arising therefrom.
2.7
Improper use
The operational reliability of the supplied product is only guaranteed if used as intended and in accordance
with section 4 of the installation and operating instructions. The limit values must on no account fall under or
exceed those values specified in the catalogue/data sheet.
14
Installation and operating instructions • Wilo-CIF-Module • Ed.03/2025-05
Werbung
