Parkside Performance PABSP 20 Li C4 Bedienungsanleitung Seite 14

rote ted s
reduces the risk of electric shock.
Personal safety
1) Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
or nder the in
al ohol or medi ation A moment
of inattention while operating power
tools may result in serious personal
injury.
2) Use personal protective
equipment. Always wear eye
rote tion Protective equipment
such as dust mask, non-skid safety
shoes, hard hat, or hearing protection
used for appropriate conditions will
reduce personal injuries.
3) Prevent unintentional starting.
Ens re the swit h is in the o -
position before connecting to
power source and/or battery
pack, picking up or carrying the
tool Carrying power tools with your
nger on the switch or energising
power tools that have the switch on
invites accidents.
4) Remove any adjusting key or
wrench before turning the power
tool on A wrench or a key left
attached to a rotating part of the
power tool may result in personal
injury.
5) Do not overreach. Keep proper
footing and balance at all
times This enables better control
of the power tool in unexpected
situations.
6) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away
rom moving arts Loose clothes,
jewellery or long hair can be caught in
moving parts.
12 GB
l Use of an RCD
en e o dr gs
7) If devices are provided for the
connection of dust extraction
and collection facilities, ensure
these are connected and properly
sed Use of dust collection can
reduce dust-related hazards.
8) Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore
tool sa et rin i les A careless
action can cause severe injury within
a fraction of a second.
Power tool use and care
1) Do not force the power tool. Use
the correct power tool for your
a li ation The correct power tool
will do the job better and safer at the
rate for which it was designed.
2) Do not use the power tool if the
switch does not turn it on and
o Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
3) Disconnect the plug from the
power source and/or the battery
pack from the power tool before
making any adjustments, changing
accessories, or storing power
tools Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
4) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the ower tool Power tools are
dangerous in the hands of untrained
users.
5) Maintain power tools and
accessories. Check for
misalignment or binding of moving
parts, breakage of parts and any
other ondition that ma a e t the
power tool's operation. If damaged,
have the power tool repaired before