Melitta OPTIMA TIMER Gebrauchsanleitung Seite 7

kungs prozess erlischt die rote LED. Das Gerät schal-
tet sich automatisch ab und die aktuelle Uhrzeit
wird angezeigt.
• Nach Beendigung des Entkalkungsprozesses müssen
Sie das Gerät 2x mit klarem Wasser ohne Kaffee
supply when unsupervised and
betreiben, um Entkalkerreste vollständig zu entfer-
before assembly, disassembly or
nen.
cleaning.
Reinigung und Pflege
• D uring operation, parts of the
• Ziehen Sie vor dem Reinigen immer den Netz -
appliance such as the steam
stecker.
outlet at the filter become very
• Tauchen Sie das Gerät oder das Netzkabel niemals
in Wasser.
hot. Avoid touching these parts
• Reinigen Sie das Gehäuse mit einem weichen,
and avoid contact with hot
feuchten Tuch.
steam.
• Reinigen Sie die Teile, die mit Kaffee in Berührung
kommen nach jedem Gebrauch. Der Filtereinsatz
• D o not open the filter holder
und die Glaskanne sind spülmaschinenfest.
during brewing.
• Der Wassertank kann unter fließendem Wasser
• T he hotplate becomes very hot
abgespült werden. Verwenden Sie keine harte
Bürste.
during use and remains hot for
a long time after the brewing
Entsorgungshinweise
process. Contact with the hot
• Bitte informieren Sie sich über Entsorgungswege für
Elektro-Geräte bei Ihrem Fachhändler oder bei Ihrer plate can cause burns, so avoid
Gemeinde.
touching it.
• Verpackungsmaterialien sind Rohstoffe und deshalb
• M ake sure that the power cable
wiederverwendbar. Bitte führen Sie sie in den Roh -
stoffkreislauf zurück.
does not touch the hot plate.
• D o not use the appliance if the
power cable is damaged.
• D o not allow the power cable
to come into contact with liquids.
• N ever immerse the appliance in
water.
• D o not use the jug in the mic-
rowave
• D o not clean the parts that
come into contact with food
with aggressive cleaning agents
or scouring cream. Remove
detergent residues with clean
water. Further information on
Read operating and safety instructions carefully!
cleaning can be found under
Safety instructions
"Cleaning and care".
• Make sure that energy supply in your household
• T his appliance can be used by
corresponds with the information on the type label
children from 8 years of age or
(see bottom of the appliance).
• Some parts (e.g. the warming plate) become hot
older if they are supervised or
while operating. Do not touch these parts.
have been instructed in the safe
• Never place the appliance on or beside hot
use of the equipment and have
surfaces.
understood the potential hazards.
• Keep the appliance out of the reach of children.
• Make sure that the cord never comes into contact
Cleaning and maintenance must
with the hot warming plate.
• Pull the plug out of the socket before cleaning or in
case of absence for a longer time. Clock and Timer
have to be re-programmed afterwards.
• Never immerse the appliance in water.
• Never place the appliance on or beside hot
surfaces.
• Keep the appliance out of the reach of children.
• Make sure that the cord never comes into contact
with the hot warming plate.
not be carried out by children,
• Pull the plug out of the socket before cleaning or in
unless they are 8 years or older
case of absence for a longer time. Clock and Timer
and are supervised. Keep the
have to be re-programmed afterwards.
• Never immerse the appliance in water.
appliance and the power cable
• The glass jug is not microwave safe.
away from children under 8 ye-
• Do not fill in hot water. Only fresh, cold water
ars of age.
should be used.
• T he appliance may be used by
• Do not open the filter during the brewing process.
persons with reduced physical,
• Do not remove the watertank during the brewing
process.
sensory or mental abilities or
• This appliance is not designed to be used by per-
lack of experience and/or know-
sons (incl. children) with restricted physical, sensory
ledge if they are supervised or
or mental capabilities or with lack of experience
or/and knowledge unless they are supervised by a
have been instructed in the safe
person who is responsible for their safety or recei-
use of the appliance and have
ved instructions from this person in how to use the
understood the potential hazards.
appliance.
• This appliance is designed to be used in households
• C hildren must not play with the
and similar applications as e.g. in kitchens for staff in
appliance
shops, offices and other commercial fields, in agri-
• R eplacement of the power cable
cultural properties, by clients in hotels, motels and
other residence facilities and in breakfast guesthou-
and all other repairs may only
ses.
be carried out by Melitta
• The replacement of the cord and all other repairs
tomer Service or by an autho-
must be carried out by authorized Melitta
Customer Centres only or by persons of similar
rised repair shop.
qualification.
Before preparing the first cup of coffee
• Connect appliance to socket. Cord can be lengh -
tend or shortened by using the cable storage (1)
• The display (LCD) is illuminated and flashes.
• Set the time by using the buttons „H" and „MIN"
(2). A quick run is possible by pressing the
buttons constantly.
• To save energy, the LCD-light switches off 2
seconds after last use of one of the buttons. If you
want to have a constant lighting of the display press
the buttons "H" and "MIN" together for longer
than 1 second. Switching off the light can be done
the same way.
• For cleaning the appliance before first use, fill the
watertank with clear, cold water. Press button
"ON/OFF" (3) to start the cleaning process.
Switch off the appliance with "ON/OFF" button
after the end of the brewing process. Repeat this
once.
Adjusting the water hardness
To maintain value and function of the appliance it has
an integrated descaling programme. The appliance can
be programmed with 4 degrees of water hardness. It
is set to high water hardness in factory. We recom-
mend an individual adjustment based on your local
degree of hardness. You can ask your local water sup-
plier or use a special control strip for determining.
To adjust degree of hardness press button „CALC"
(4) and keep it pressed. The display shows the factory
provided presetting. For adjustment press button
To maintain
an integrate
be programm
is set to high
mend an ind
degree of ha
plier or use
To adjust de
(4) and kee
provided pre
„MIN" as lo
GB
degree of ha
"CALC" bu
Your choose
adjustment
disconnecte
Coffee p
To maintain
coffee packa
gerator. We
cup for best
result fold t
packaging.
• Fill the rem
water. The
to prepare
water tank
• Insert the
Cus-
®
• Swivel out
filtercone
coffee into
snaps in.
• Press „ON
minated an
• After end
the applian
• Let the ap
2 brewing
Timer fu
The applianc
this function
automaticall
• Press the
GB
When pro
the display
7