Parkside PSSA 4 B2 Originalbetriebsanleitung Seite 23

the device is passed on to another
user.
Proper use
This device is only intended for the
following use:
• Screwing and unscrewing
screws in wood, metal or
plastic
• Light drilling work
Only operate in dry areas.
Any other use that is not expressly
permitted in this instruction manual
may pose a serious hazard to the
user and result in damage to the
device. The operator or user of the
machine is responsible for any ac-
cidents or personal injury and/or
material damage to third parties or
their property. The machine is in-
tended to be used by do-it-your-
selfers. It was not designed for
heavy commercial use. The war-
ranty is void in the case of com-
mercial use. The manufacturer is
not liable for damage caused by
improper use or incorrect opera-
tion.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material
properly.
• Cordless Screwdriver
• USB-C charging cable
• 26 Bits:
• Slot
- SL (25 mm): 3, 4, 5, 6, 7
- SL (50 mm): 5
• Phillip's head
- PZ (25 mm): 0, 2x1, 2x2, 3
- PZ (50 mm): 2
• Phillip's head
- PH (25 mm): 0, 2x1, 2x2, 3
• Hexalobular socket
- T (25 mm): 10, 15, 20, 25
• Hexalobular socket
- H (25 mm): 3, 4, 5
• Magnetic bit holder
• Storage case
• Translation of the original in-
structions
The power adapter is not in-
cluded.
Overview
The illustrations for
the device can be
found on the front
fold-out page.
1 Bit holder
Release button for handle
2
setting
3 Torch (not visible)
4 Charge level indicator
5 On/Off switch, Torch
6 Handle
7 On/Off switch
8 Direction of rotation switch
9 LED work light
10 Power adapter
11 USB-C charging cable
12 Charging cable connector
GB MT
23