Meec tools 014093 Bedienungsanleitung Seite 14

2
Remove the old oil from the engine oil tank. Use
EN
an oil change pump to remove the oil.
3
SV
Use a funnel and fill the engine oil tank with new
engine oil up to the "Max" mark on the dipstick.
NO
Note! Do not fill the engine oil tank above the "Max" mark
on the dipstick.
DA
4
Tighten the oil cap.
5
Clean the product and the adjacent area from
PL
spilled oil if necessary.
DE
7.6 To clean the product
Warning! Stop the product, remove the spark plug
FI
cap and let all moving parts have come to a complete
stop before you clean the product.
FR
● Clean the product after each use. Dry, bonded grass
and other debris can have unwanted effects on the
operation of the product.
NL
1
Remove grass and dirt from the ejector opening.
2
Remove grass and other debris from the surface of
the product.
3
Remove the fuel from the fuel tank with a fuel
pump.
4
Put the product on the side opposite to the oil filler
cap. Do not tilt the lawn mower more than 90°.
5
Clean the bottom of the deck and the attachment
of the blade with a brush, broom or equivalent.
14