Hach LDO sc Model 2 Sensor Benutzerhandbuch Seite 19

Event
Set defaults
(or SET DEFAULTS)
Cleaning interval
(or CLEAN INTRVL)
Section 11 Replacement parts and accessories
Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Replacement items
Description
Calibration bag
Replacement Sensor Cap Kit
Accessories
Description
Digital extension cable, 1 m (3.2 ft)
Digital extension cable, 7.7 m (25 ft)
Digital extension cable, 15 m (50 ft)
Digital extension cable, 31 m (101 ft)
Cable lock for sensor connector, C1D2 hazardous locations
Digital termination box for SC200 and SC4500 Controllers
Digital extension cable with cable lock, 1 m (3.2 ft)
Digital extension cable with cable lock, 7.7 m (25 ft)
Digital extension cable with cable lock, 15 m (50 ft)
Digital extension cable with cable lock, 31 m (101 ft)
High output air blast cleaning system, 115 V (not rated for use in hazardous locations)
High output air blast cleaning system, 230 V (not ATEX rated for use in hazardous locations)
Hardware kit for pole mount (PVC)
Hardware kit for float mount (PVC)
Hardware kit for air blast mount
Hardware kit for chain mount (stainless steel)
Hardware kit for union mount
Table 5 Event list (continued)
Description
The sensor settings were set to the default values.
The time between sensor cleaning has changed.
W A R N I N G
Item no.
5796600
9021100
Item no.
6122400
5796000
5796100
5796200
6139900
5867000
6122401
5796001
5796101
5796201
6860000
6860100
9253000
9253100
9253500
LZX914.99.11200
9257000
English 19