Important Safety Information - Konig + Neurath TALO.S Bedienungsanleitung

Important safety information

The Talo.S lift desk must be assembled and used according to
these operating and assembly instructions, otherwise there is a
risk of serious injury.
The 2-column lift frame is exclusively designed for use as an ergo-
nomic adjustment option for desks, complying with the weights
and dimensions as stated in these assembly instructions. Any use
that exceeds these is considered to be not in accordance with spe-
cifications, and the manufacturer is not liable for any resulting
damage. The user alone is responsible for this risk.
Please also observe the general, legal and other regulations and
legal provisions – including those applying to the country of opera-
tion – as well as the applicable environmental regulations! Local
regulations imposed by mutual indemnity associations or other
supervisory authorities must always be observed!
Any unauthorised changes to TM 86 render the manufacturer
exempt from liability for resulting damages.
Keep the assembly and operating instructions near to the equip-
ment.
Never leave children unattended where these desks are in use.
Children are not able to gauge the danger associated with the desk
movement.
After the desk has been assembled, do NOT pull out the
cotter pin under the end cap at the side. Please observe
the operating instructions in this manual. Otherwise
there is a serious risk of injury!
19