Technical Specifications; Intended Use - Musway One2000 Bedienungsanleitung

ENGLISH

TECHNICAL SPECIFICATIONS

Model
Channels
Circuit
OUTPUT POWER RMS @ 14.4 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Watts @ 1 Ohm
Frequency Range –3dB
Damping Factor
Signal-to-Noise Ratio
THD+N @ 5 W
Input Sensitivity
Filter Section
Sub Sonic Filter
Low Pass Filter
Bass Boost
Phase Shift
Start-stop capability
High Level Inputs with EPS
Auto Turn On
Bass Level Remote Controller
Fuse Rating
Dimensions
All Specifications are subject to change

INTENDED USE

This product is designed to operate in a vehicle with an on-board voltage of +12 V with negative ground. The
device functions as an audio amplifier that is used within a vehicle sound system.
4
ONE2000
1
Digital Class D
1 x 750
1 x 1250
1 x 2000
5 - 1470 Hz
1450
103 dB
0,039 %
High Level: 420 mV - 10,6 V
Low Level: 185 mV - 6,1 V
10 - 40 Hz
40 - 150 Hz
0 - 18 dB @ 45 Hz
0 - 180°
Yes
Yes
Via DC or Signal
Yes
1 x 200 A (external)
150 x 45 x 300 mm