Technical Specifications - Musway M12 Bedienungsanleitung

ENGLISH

TECHNICAL SPECIFICATIONS

POWER SUPPLY
Voltage:
Idle current:
Switched off:
Remote IN:
Remote OUT:
Fuse:
AMPLIFIER STAGE
Distortion - THD (1 kHz @ 4 Ω, 90% Power):
Bandwidth (-3 dB, 2 V RMS, 4Ω):
S/N ratio @ A weighted, 1 V, Max. Power:
Damping factor @ 1 kHz, 2 V RMS, 4 Ω:
Input sensitivity:
Input impedance:
LOAD IMPEDANCE (MIN):
@ 12CH:
@ Bridged:
OUTPUT POWER (RMS) @ 14.4 VDC, 1% THD*:
@ 4 Ω:
@ 2 Ω:
Bridged @ 4 Ω:
SIGNAL OUTPUTS
RCA OUT CH13/14 & CH15/16:
* In typical multi-channel applications (2- / 3-way systems + rear speakers + subwoofer)
Declaration of Conformity
Audio Design GmbH hereby declares that the MUSWAY M12 device complies with
Directive 2014/53/EU. The full declaration of conformity can be viewed at www.musway.de/CE
2
8 - 24 V RMS (High-level); 2 - 6 V RMS (Low-level); 1 - 8 V RMS (AUX)
7,5 - 15 VDC (1 mA)
11 - 15 VDC (200 mA)
15 Hz - 22 kHz
13 Ω (High-level); 47 kΩ (Low-level)
5 V RMS Max.
8 - 15 VDC
3.2 A
<0.1 mA
40 A x 2
0.05 %
95 dB A
> 70
2 Ω
4 Ω
85 W
120 W
240 W