Samson 3347 Einbau- Und Bedienungsanleitung Seite 78

DECLARATION OF CONFORMITY
For the following product
Type 3347
Hygienic Angle Valve
European regulation
Food contact
The Hygienic Angle Valve Type 3347 meets the requirements of the food and pharmaceutical industry.
Manufacturing processes of Samson Regulation and those of its suppliers comply with the good manufactur-
ing practices established by regulation (EC) No. 2023/2006
The valve components in contact with foodstuffs meet the following requirements:
- the metal parts are made of forged stainless steel 1.4404/316L (valve body and plug) or cast stainless
steel 1.4409/A351 CF3M (valve body) in accordance with:
- PTFE-guided version : The stem seal, which ensures the seal with the outside, is made of PTFE in
accordance with:
- PEEK-guided version:
1
Regulation (EC) No 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food
2
Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food
3
Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food, as last amended by Regulation
(EU) No 2020/1245
14-8
o the regulations (EC) No. 1935/2004
o the Council of Europe Resolution CM/Res(2013)9 on metals and alloys used in food contact
materials and articles;
o the French decree of 13 January 1976 on stainless steel materials and objects in contact with
foodstuffs;
o the sheet published by the French authority DGCCRF: MCDA n°1 (V2 - 2017), Aptitude for
food contact of metals and metal alloys intended to come into contact with foodstuffs.
o the regulations (EC) No. 1935/2004
The conditions and results of the overall and specific migration tests are detailed on Annex 1.
o with the recommendations LI & LII for PTFE, XXI for EPDM published by BfR (Federal Institute
for Risk Assessment).
o The steam seal, which ensures the seal with the outside, is made of PEEK in accordance with:
the Regulations (EC) No. 1935/2004
▪
The conditions and results of our supplier's global and specific migration tests are availa-
ble on Annex 2.
o The body seal is made of PTFE in accordance with:
.
1
2
and (EU) No. 10/2011 as amended
2 3
and (EU) No. 10/2011
2
DC006
2024-12
as amended
3
EB 8097