Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety
3.4
Intended use
The device is a make-up station for heating and cooling water systems with diaphragm expansion vessels. It is
intended to maintain the water pressure and to add water within a system circuit. Operation can only take place in
system circuits with static pressurisation that are sealed against corrosion using the following water types:
•
Non-corrosive
•
Chemically non-aggressive
•
Non-toxic
The ingress of atmospheric oxygen by permeation into the entire heating and cooling water system, make-up water
and similar must be reliably minimized during operation.
3.5
Inadmissible operating conditions
The device is not suitable for the following applications:
•
Mobile system operation.
•
Outdoor operation.
•
For use with mineral oils.
•
For use with flammable media.
•
For use with distilled water.
•
For use with glycol.
Note!
It is not permitted to make any modifications to the hydraulics or the circuitry.
3.6
Residual risks
This device has been manufactured to the current state of the art. However, some residual risk cannot be
excluded.
CAUTION
Risk of burns on hot surfaces
Hot surfaces in heating systems can cause burns to the skin.
•
Wear protective gloves.
•
Please place appropriate warning signs in the vicinity of the device.
CAUTION
Risk of injury due to pressurised liquid
If installation, disassembly or maintenance work is not carried out correctly, there is a risk of burns and other
injuries at the connection points, if pressurised hot water or hot steam suddenly escapes.
•
Ensure proper installation, disassembly or maintenance work.
•
Ensure that the system is de-pressurised and cooled down before performing installation,disassemblyl or
maintenance work at the connection points.
16 — English
Fillset — 11.2024
Werbung
