Herunterladen Diese Seite drucken

Reflex Fillset Combi Originalbetriebsanleitung Seite 14

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
Information concerning the operating manual
1
Information concerning the operating manual
This operating manual is an important aid for ensuring the safe and reliable functioning of the device.
Reflex Winkelmann GmbH accepts no liability for any damage resulting from failure to observe the information in
this operating manual. In addition to the requirements set out in this operating manual, national statutory
regulations and provisions in the country of installation must also be complied with (concerning accident
prevention, environment protection, safe and professional work practices, etc.).
This operating manual describes the device with basic equipment and interfaces for optional equipment with
additional functions.
Notice!
Every person installing this equipment or performing any other work at the equipment is required to
carefully read this operating manual prior to commencing work and to comply with its instructions. The
manual is to be provided to the product operator and must be stored near the product for access at
any time.
2
Liability and guarantee
The device has been built according to the state of the art and recognised safety rules. Nevertheless, its use can
pose a risk to life and limb of personnel or third persons as well as cause damage to the system or other property.
It is not permitted to make any modifications at the device, such as to the hydraulic system or the circuitry.
The manufacturer shall not be liable nor shall any warranty be honoured if the cause of any claim results from one
or more of the following causes:
Improper use of the device.
Unprofessional commissioning, operation, service, maintenance, repair or installation of the device.
Failure to observe the safety information in this operating manual.
Operation of the device with defective or improperly installed safety/protective equipment.
Failure to perform maintenance and inspection work according to schedule.
Use of unapproved spare parts or accessories.
Prerequisite for any warranty claims is the professional installation and commissioning of the device.
Note!
Arrange for Reflex Customer Service to carry out commissioning and annual maintenance,  8.1
"Reflex Customer Service",  22.
14 — English
Fillset — 11.2024

Werbung

loading

Diese Anleitung auch für:

Fillset standard68131056813100